Blog

CCNP SWITCH 300-115 answer-CertTree.com

by

parenkaramoCisco 300-115 exam is very popular in Cisco field,many candidates choose this exam to add their credetials,There are many resource online to offering CCNP SWITCH 300-115 answer-CertTree.com,CertTree CCNP SWITCH 300-115 answer-CertTree.com have been prepared for you by the skilled and experienced team of IT professionals who have a long experience of students’ problems and their requirements of the said certification. CertTree 300-115 exam can add your confidence in achieving your goal.

With many online resources for preparing the 300-115 exam, when you read the below information you will notice that CertTree is your premier source for 300-115 exam preparation. Our CCNP SWITCH 300-115 answer-CertTree.com are enough to prepare you best for your coming 300-115 Certification Exam. CertTree guarantees that you will be easily able to succeed in your 300-115 Certification Exam.

Share some CCNP 300-115 exam questions and answers below.What is the default value for the errdisable recovery interval in a Cisco switch?A. 30 secondsB. 100 secondsC. 300 secondsD. 600 secondsAnswer: CInterface FastEthernet0/1 is configured as a trunk interface that allows all VLANs. This command is configured globally: monitor session 2 filter vlan 1 – 8, 39, 52What is the result of the implemented command?A. All VLAN traffic is sent to the SPAN destination interface.B. Traffic from VLAN 4 is not sent to the SPAN destination interface.C. Filtering a trunked SPAN port effectively disables SPAN operations for all VLANs.D. The trunk’s native VLAN must be changed to something other than VLAN 1.E. Traffic from VLANs 1 to 8, 39, and 52 is replicated to the SPAN destination port.Answer: EWhat is the size of the VLAN field inside an 802.1q frame?A. 8-bitB. 12-bitC. 16-bitD. 32-bitAnswer: BWhich statement about the use of SDM templates in a Cisco switch is true?A. SDM templates are used to configure system resources in the switch to optimize support for specific features, depending on how the switch is used in the network.B. SDM templates are used to create Layer 3 interfaces (switch virtual interfaces) to permit hosts in one VLAN to communicate with hosts in another VLAN.C. SDM templates are used to configure ACLs that protect networks and specific hosts from unnecessary or unwanted traffic.D. SDM templates are used to configure a set of ACLs that allows the users to manage the flow of traffic handled by the route processor.E. SDM templates are configured by accessing the switch using the web interface.Answer: AAn administrator recently configured all ports for rapid transition using PortFast. After testing, it has been determined that several ports are not transitioning as they should.What is the reason for this?A. RSTP has been enabled per interface and not globally.B. The STP root bridge selection is forcing key ports to remain in non-rapid transitioning mode.C. STP is unable to achieve rapid transition for trunk links.D. The switch does not have the processing power to ensure rapid transition for all ports.Answer: CWhich command does a network engineer use to verify the spanning-tree status for VLAN 10?A. switch# show spanning-tree vlan 10B. switch# show spanning-tree bridgeC. switch# show spanning-tree briefD. switch# show spanning-tree summaryE. switch# show spanning-tree vlan 10 briefAnswer: AA network engineer has just deployed a non-Cisco device in the network and wants to get information about it from a connected device. Cisco Discovery Protocol is not supported, so the open standard protocol must be configured.Which protocol does the network engineer configure on both devices to accomplish this?A. IRDPB. LLDPC. NDPD. LLTDAnswer: BWhen SDM templates are configured, which action must be performed for the configuration to take effect?A: reloadB: shutdownC: write memoryD: backup configAnswer: A

What effect does the mac address-table aging-time 180 command have on the MAC address- table?

A. This is how long a dynamic MAC address will remain in the CAM table.B. The MAC address-table will be flushed every 3 minutes.C. The default timeout period will be 360 seconds.D. ARP requests will be processed less frequently by the switch.E. The MAC address-table will hold addresses 180 seconds longer than the default of 10 minutes.Answer: AWhich two protocols can be automatically negotiated between switches for trunking? (Choose two.)A. PPPB. DTPC. ISLD. HDLCE. DLCIF. DOT1QAnswer: CFAfter the implementation of several different types of switches from different vendors, a network engineer notices that directly connected devices that use Cisco Discovery Protocol are not visible.Which vendor-neutral protocol could be used to resolve this issue?A. Local Area MobilityB. Link Layer Discovery ProtocolC. NetFlowD. Directed Response ProtocolAnswer: BIn a Cisco switch, what is the default period of time after which a MAC address ages out and is discarded?A. 100 secondsB. 180 secondsC. 300 secondsD. 600 secondsAnswer: CWhen you design a switched network using VTPv2, how many VLANs can be used to carry user traffic?A. 1000B. 1001C. 1024D. 2048E. 4095F. 4096Answer: BAn EtherChannel bundle has been established between a Cisco switch and a corporate web server. The network administrator noticed that only one of the EtherChannel links is being utilized to reach the web server.What should be done on the Cisco switch to allow for better EtherChannel utilization to the corporate web server?A. Enable Cisco Express Forwarding to allow for more effective traffic sharing over the EtherChannel bundle.B. Adjust the EtherChannel load-balancing method based on destination IP addresses.C. Disable spanning tree on all interfaces that are participating in the EtherChannel bundle.D. Use link-state tracking to allow for improved load balancing of traffic upon link failure to the server.E. Adjust the EtherChannel load-balancing method based on source IP addresses.Answer: EWhich statement about the UDLD protocol is true?A. UDLD is a Cisco-proprietary Layer 2 protocol that enables devices to monitor the physical status of links and detect unidirectional failures.B. UDLD is a Cisco-proprietary Layer 2 protocol that enables devices to advertise their identity, capabilities, and neighbors on a local area network.C. UDLD is a standardized Layer 2 protocol that enables devices to monitor the physical status of links and detect unidirectional failures.D. UDLD is a standardized Layer 2 protocol that enables devices to advertise their identity, capabilities, and neighbors on a local area network.Answer: ACertTree is a professional IT certification sites, the certification success rate is 100%. This number is proved by candidates through practice. Because CertTree has a strong IT team of experts, they are committed to study CCNP SWITCH 300-115 answer-CertTree.com, and serve the vital interests of the majority of candidates. They use their own professional mind and experience to meet the needs of the candidates. According to the needs of the candidate, they consider the issue from all angles, and manufacturing applicability exam training materials. This material is CCNP SWITCH 300-115 answer-CertTree.com, which including questions and answers.https://www.certtree.com/300-115.html

The latest CCNP SWITCH 300-115 answer from CertTree are the best way for your preparation, it can help you pass your exam easily.

Article Source:

eArticlesOnline.com}